Car small O to mention that the car has been there a year and a half, from mentioning the car and now, in fact, a variety of small problems, really a lot to repair shop to have trouble even themselves have begun to hands-on research and resolve from thesmall O fault with it, saying that the only advantage is tempered my hands and the ability to think for themselves. Replace the air filter from the first to the small O now, this time would like to give a small O replaced just buy new earth TB glue. The original car and plastic or mention 4S send the car when the feeling is not good quality, and then install sucks, spent a year and a half has been the limit.
Newly purchased and plastic goods to Wednesday, just afternoon work is not busy, to yourself to spend a three-hour time paved.
The construction tools:
Phillips and flat-blade screwdriver; various length sleeve; scissors
Simply under construction order:
Firstly, respectively, with 12 and 13 remove the rear seat of the sleeve screws to remove the rear seat;
Then, 12 sleeve demolition of the driver's seat screws to remove the driver's seat, the front row seat;
Then, using a screwdriver to remove the guard plate screws and driving bit underneath the rear seat left and right guard;
Re-use of the 17 sleeve demolition seat belt screws to remove the guard within the left and right sides of the B-pillar;
Removed from the driving position on both sides of the inner fender, remove the screw with a screwdriver to open the cup mouth, with 10 sleeve apart screws, loose guard
Own hands-edge edge construction photographs showing the effect please understanding.
Newly purchased and plastic goods to Wednesday, just afternoon work is not busy, to yourself to spend a three-hour time paved.
The construction tools:
Phillips and flat-blade screwdriver; various length sleeve; scissors
Simply under construction order:
Firstly, respectively, with 12 and 13 remove the rear seat of the sleeve screws to remove the rear seat;
Then, 12 sleeve demolition of the driver's seat screws to remove the driver's seat, the front row seat;
Then, using a screwdriver to remove the guard plate screws and driving bit underneath the rear seat left and right guard;
Re-use of the 17 sleeve demolition seat belt screws to remove the guard within the left and right sides of the B-pillar;
Removed from the driving position on both sides of the inner fender, remove the screw with a screwdriver to open the cup mouth, with 10 sleeve apart screws, loose guard
Own hands-edge edge construction photographs showing the effect please understanding.
没有评论:
发表评论