2012年9月21日星期五

The technical difficulty little 1.6 manual Excelle modified automatically controlled air-conditioning

Manually KK1.6 two years, the performance has been good, average fuel consumption of 8.5 basic run urban, the LP adult just started to get turned around 12, see the silver shining white stop the outflow of my heart panic .... Closer to home, I have this hobby (amateur self-study), the practical ability can also dare car demolished demolition, two cars, maintenance is also good.

KK's good air conditioning performance the cooling effect personal feeling is very good, but that manual control over long distances uncomfortable, not off AC, cold off while hot. Thus kept open, shut, open, shut ..... really irritated. So would like to change the idea of automatic control. Online search, turn over, but other models, KK rarely, but also the old models. Wanted to come to the same principles, the technical difficulty is not large, so determined to hands-KK, manual air conditioning change.

Online spend 85 rice, bought a miniature electronic thermostat, the day before 6:00 PM start, huh, huh, too hot during the day, can not stand, only sunlight, slightly down a little cooler.

Thermostat wiring


Special note: made ​​a positive line at hand is not enough, so the red line made ​​negative, the yellow line. No. 1: negative (casually ride in the metal of the vehicle body on the can); turned No. 2 and No. 4, as a positive electrode (the AC signal input terminal); No. 3 for the output terminal of the AC signal by the thermostat control. Line is the best is a little rough, some insurance, afraid that the current is too large. No. 11, No. 12, then the two wires of the sensor head (random access, regardless of positive or negative).

Second, the dissolution of the panel, the co-pilot before the tool box. How demolition method do not speak more online. I first demolition panel, had a lot of fresh. Talk a little experience: go to the hardware store to spend 2.5 yuan to buy a lacquerer scraping gray scraper (narrow point, this is 5cm wide) demolition panel lingua franca (Note To cushion layer of paper on both sides of the blade yo do not directly use the scraper to ski, easy to scratch the panel). Demolition from the start that the cover of the mesa, and the front windshield at the start that gap, skid-up hand up pull got on the cover all the clips, a little tight, likely will clamp tension, but the relationship is not . Online stresses on the seams of the cover from the panel and began to pry, that is wrong, would damage the cover, I began to eat a little loss. Finally, by observing only to find the front windshield at that the seam began fishes head. The cover apart, you will see two screws at the top of the control panel, unscrew the screws, they rely on the Arts daring effort (all clips), have to cautious, do not get to spend the panel and the surrounding decorative epidermis.

Panel pry open, do not rush to win actually Nabuxialai. Under three knobs, each of the two knobs on the right (outlet conversion and cooling and thermal conversion) internal one PULL since even with the other components, respectively, head stretched down under the direction of the machine and tool box to see the demolition The method is also very simple, not much mentioned, can also find online diagram look at the. Pulled out the wiring on the control panel (rest assured dial it, the bayonet is a one-to-one correspondence), my electronic clock line is too tight, but also no reversal, no matter what.

The demolished panel spent more than two hours, sweating. (I use the tool, originally computer repair, to fix the car, compiled computer program can also find me ...)





Cross Kai is best to have a short to the demolition of the panel above the screws.
  

没有评论:

发表评论